FOX (5Z) - VAG Coding

VW Fox 5Z (2005-2011)

Purpose : To configure automatic door locking at speeds over 15 km/h. Proceed : 1 - Engine off, ignition off, connect your...

Purpose : to configure automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect...

Purpose : To change the language of the ODB. (Highline MFA) Proceed : 1 - Engine off, ignition off, connect your official...

Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no...

Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). (Models after 2000) Proceed : 1 - Engine off,...

Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1...

Purpose : to configure the keys to be used with the vehicle. WARNING: This procedure does not configure keys with immobilizer. Proceed...

Purpose: Selects rear defrost duration. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then...

Purpose: Resets the configuration of all keys. ATTENTION: No more keys will be recognized with the vehicle. Proceed : 1 - Engine...

Purpose : Activates beeps when vehicle is locked. Only for vehicles with alarm (1 beep for locking) Proceed : 1 - Engine...

Purpose : activates turn signals when vehicle is locked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Purpose : Activates beeps when vehicle is unlocked. Only for vehicles with alarm (2 beeps for unlocking) Proceed : 1 - Engine...

Purpose : activates turn signals when vehicle is unlocked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...