Purpose: Closes windows and sunroof after removing key and opening door.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on “Select” then click on “09 – Cent. Elect.” .
4 – Click on “Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
6 – Choose Byte 4:
Bit 4: Uncheck “Power Windows/Sunroof disabled after door opening”
Bit 7: Check “Power Windows/Sunroof enabled after Terminal 15/Ignition OFF ”
