VW Eos 1F (2006-2015) / Eos 1F facelift (specific facelift coding at bottom of page)
Eos (1F) – Corner Lights activation
Purpose: When the cornering lights are activated, the fog lights come on on the side where the steering wheel is turned at...
Eos (1F) – Cruise control activation (retrofit)
Purpose: to activate the speed governor after retrofitting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Eos (1F) – Activate daytime running lights with fog lamps (DRL)
Purpose: Allows fog lamps to be used as daytime running lights. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Eos (1F) – Activate mood lighting
Purpose: to activate ambient lighting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then...
Eos (1F) – Activate Leaving Home without light sensor
Purpose: automatically switches on the headlights each time the vehicle is unlocked. The headlights will come on whether it's day or night....
Eos (1F) – Activate turn signals in US mode
Purpose: to activate US indicators. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then...
Eos (1F) – Activate door bottom lights (retrofit)
Purpose: to activate door bottom lights after retrofitting. Connection: Pin 18 and 19 of the 32-pin pin on the driver and front...
Eos (1F) – Display speed on RCD 300
Purpose: To add a driving-school mode view to the RCD 300 that displays speed (also ideal for accompanied driving) Procedure: 1 -...
Eos (1F) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Eos (1F) – Automatic headlight activation in case of rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure: 1 - Engine off, ignition...
Eos (1F) – Comfort flasher
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Eos (1F) – Door unlocking confirmation (Key)
Purpose : to set door unlocking confirmation when using the key. Proceed : 1 - Engine off, ignition off, connect your official...
Eos (1F) – Door unlock confirmation (Remote control)
Purpose : to set the door unlock confirmation when using the remote control. Proceed : 1 - Engine off, ignition off, connect...
Eos (1F) – Door lock confirmation (key)
Purpose : to set door lock confirmation when using the key. Proceed : 1 - Engine off, ignition off, connect your official...
Eos (1F) – Door lock confirmation (Remote control)
Purpose : to set door lock confirmation when using the remote control. Proceed : 1 - Engine off, ignition off, connect your...
Eos (1F) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...
Eos (1F) – Permanent headlight deactivation (Scandinavian)
Purpose: to deactivate permanently switched-on low-beam headlamps, which are only activated when set to Auto, and to have only parking lights on...
Eos (1F) – Deactivate burnt-out bulb display
Purpose: To deactivate the burnt-out bulb indicator on the ODB. After adding LEDs, your on-board computer may indicate that the replaced bulb...
Eos (1F) – Deactivate windshield washer indicator
Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off, connect...
Eos (1F) – Deactivate brake pad warning light
Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no...
Eos (1F) – Automatic door unlocking
Purpose: to set automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect your...
Eos (1F) – Selective door unlocking
Purpose : Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all...
Eos (1F) – Automatic closing of windows and roof in case of rain
Purpose: Automatically closes windows and sunroof when it rains. The vehicle must be locked with the remote control for this to work....
Eos (1F) – One-touch window closing
Purpose: to activate closing and opening of the windows and sunroof with the remote control WITHOUT remaining pressed until the windows are...
Eos (1F) – Flash mode during emergency braking
Purpose: activates brake lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM...
Eos (1F) – Ambient light intensity
Purpose: Used to adjust ambient lighting intensity. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Eos (1F) – Modify power steering hardness
Purpose : to adjust the hardness of the power steering for a softer or harder steering wheel. Proceed : 1 - Engine...
Eos (1F) – Fold down mirrors with ignition off and door open
Purpose : Allows mirrors to be folded down even after the ignition has been switched off and a door opened. (Also enables...
Eos (1F) – Headlight washer duration setting
Purpose: to set the duration of headlamp washer activation. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Eos (1F) – Coming Home time setting
Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...
Eos (1F) – Defrost time setting
Purpose: to set the operating time for mirror and rear window defrosting. Procedure: 1 - Engine off, ignition off, connect your official...
Eos (1F) – Leaving Home duration setting
Purpose: to set the length of time the headlights remain on after the car is unlocked. Procedure: 1 - Engine off, ignition...
Eos (1F) – Set light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Eos (1F) – Reset drain interval to zero
Purpose: to reset the drain interval. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer,...
Eos (1F) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Eos (1F) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
VW Eos 1F facelift (2011-2015)
Eos (1F) Facelift – Activate ambient lighting
Purpose: to activate ambient lighting. (After wiring and lighting installation for retrofitting) Procedure : 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Activate Bluetooth on RNS 315
Purpose: to activate Bluetooth on the RNS 315. ATTENTION: Not all RNS-315 are equipped with a Bluetooth module. Module compatibility list3C0 035...
Eos (1F) Facelift – Activate Coming / Leaving Home
Purpose: to activate Coming Home and Leaving Home. And add it to the ODB (MFA) Procedure: 1 - Engine off, ignition off,...
Eos (1F) Facelift – Activate daytime running lights (DRL) only with headlight switch in Auto position
Purpose: to activate daytime running lights (DRL) only when the light switch is in Auto position. Procedure: 1 - Engine off, ignition...
Eos (1F) Facelift – Activate daytime running lights with fog lamps (DRL)
Purpose: Allows fog lamps to be used as daytime running lights. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Eos (1F) Facelift – Activate Driving School mode (RCD 210/RCD 310)
Purpose: Allows you to add a Driving School mode view to the RCD 210, RCD 310 that displays turn signals, speed ......
Eos (1F) Facelift – Activate headlamp washers
Purpose: to activate the headlamp washers. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Eos (1F) Facelift – Activate multifunction steering wheel and paddle shifter (retrofit)
Purpose : activates multifunction steering wheel with/without paddles (retrofit) (Modifications only possible after retrofitting the multifunction steering wheel) Be careful how you...
Eos (1F) Facelift – Activate reversing camera (retrofit)
Purpose: to activate the reversing camera after installation on the RCD 510/330/360/440 and RNS 315/510 (retrofit). Proceed : 1 - Engine off,...
Eos (1F) Facelift – Activate RNS 510 (retrofit)
Purpose: To enable installation of the RNS 510 to replace the original RCD-310 (retrofit). Procedure: 1 - Engine off, ignition off, connect...
Eos (1F) Facelift – Activate RNS 510 voice command
Purpose: to activate voice control on the RNS 510 (SDS). ATTENTION: RNS 510 firmware must be version v2660. Activating voice control brings...
Eos (1F) Facelift – Adapting brake assist
Purpose : to configure brake assist. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Eos (1F) Facelift – Add daytime running lights (DRL) to ODB
Purpose: to add DRL activation/deactivation to the ODB (MFA). (2011+) Procedure : 1 - Engine off, ignition off, connect your official VAG-COM...
Eos (1F) Facelift – Add mirror adjustment to ODB
Purpose: to add the mirror adjustment menu, synchronize or individual in the ODB (MFA). (2011+) Procedure : 1 - Engine off, ignition...
Eos (1F) Facelift – Adjust light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Eos (1F) Facelift – Adjusting the volume of the reversing beep
Purpose: to adjust the volume of the reversing beep. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Eos (1F) Facelift – Automatic closing of windows and roof in case of rain
Purpose: Automatically closes windows and sunroof when it rains. The vehicle must be locked with the remote control for this to work....
Eos (1F) Facelift – Automatic door locks
Purpose : to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Eos (1F) Facelift – Automatic door unlocking
Purpose: to set automatic door unlocking when the key is removed. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Eos (1F) Facelift – Automatic headlamp activation in case of rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure : 1 - Engine off,...
Eos (1F) Facelift – Automatic headlamps from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Eos (1F) Facelift – Automatically folding mirrors
Purpose: Automatically folds mirrors when vehicle is locked. For 4th generation door modules (models from 2013) activation is possible with VCDS VAG-COM...
Eos (1F) Facelift – Change the image of the RCD/RNS OPS
Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510. Procedure: 1 - Engine...
Eos (1F) Facelift – Change the RCD/RNS 510 theme
Purpose: to change the display theme of the RCD 510 and RNS 510. Procedure: 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Coming / Leaving Home with fog lamps
Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Coming / Leaving Home with Xenons
Purpose: Activates xenon headlamps instead of fog lamps for Coming Home and Leaving Home. Procedure : 1 - Engine off, ignition off,...
Eos (1F) Facelift – Coming-Home settings
Purpose : to configure Coming-Home behavior. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Eos (1F) Facelift – Corner lights activation
Purpose: Activating the cornering lights switches on the fog lamp on the side where the steering wheel is turned at speeds under...
Eos (1F) Facelift – Corner Lights in reverse
Purpose: to activate the cornering lights with the fog lamps when reversing. Procedure : 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Cruise control activation (retrofit)
Purpose : to activate cruise control (retrofit) (Modification only possible after retrofit of cruise control switch) Proceed : 1 - Engine off,...
Eos (1F) Facelift – Daytime running lights off (DRL) with handbrake on
Purpose: to deactivate the daytime running lights (DRL) when the handbrake is engaged. Procedure: 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Deactivate brake pad warning light
Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...
Eos (1F) Facelift – Deactivate burnt-out bulb display
Purpose: Disables the burnt-out bulb display on the ODB. After adding LEDs, your on-board computer may indicate that the replaced bulb is...
Eos (1F) Facelift – Deactivate ESP
Purpose: to deactivate ESP completely. ATTENTION: Only valid for vehicles from 2012. Procedure : 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
Eos (1F) Facelift – Delete alarm belt
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Eos (1F) Facelift – Disable Bluetooth connection beep
Purpose : Disables the beep when a device successfully connects to the car radio's Bluetooth. Procedure : 1 - Engine off, ignition...
Eos (1F) Facelift – Disable plate light control (ODB LED error)
Purpose: Disables license plate light control. Useful when installing LED bulbs without resistance or for error prevention. Procedure: 1 - Engine off,...
Eos (1F) Facelift – Door lighting (retrofit)
Purpose: Enables door lighting to be activated after retrofitting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Eos (1F) Facelift – Door lock/unlock confirmation (beep)
Purpose: Enables vehicle lock/unlock confirmation with beeps (with alarm) and adds beep selection menu to ODB (MFA). Procedure: 1 - Engine off,...
Eos (1F) Facelift – Electronic differential lock (XDS)
Purpose: to activate the electronic differential lock (XDS). The electronic differential lock (XDS) is an extension of the well-known EDS function. However,...
Eos (1F) Facelift – Enable Bluetooth (retrofit)
Purpose: Enables Bluetooth installation for the RCD 510 / RNS 510 after retrofitting the module under the passenger seat. Two different modules...
Eos (1F) Facelift – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Fog lamps with high beam
Purpose: to deactivate the fog lamps when the high beam is switched on, so that they don't go out when the high...
Eos (1F) Facelift – Heated seat memory
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Eos (1F) Facelift – Hill Hold Control
Purpose: to activate Hill Hold Control. Hill Hold Control maintains brake pressure for a few seconds after prolonged application of the brake...
Eos (1F) Facelift – LEDs dimmed with turn signals
Purpose: to maintain LED intensity with indicators. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Eos (1F) Facelift – Lowering the passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
Eos (1F) Facelift – Maintain LED intensity with turn indicators
Purpose: to dim the LEDs with the indicators. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Eos (1F) Facelift – Modify power steering hardness
Purpose : to adjust the hardness of the power steering for a softer or harder steering wheel. Proceed : 1 - Engine...
Eos (1F) Facelift – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. When you start your Golf, the speedometer needles...
Eos (1F) Facelift – Oil temperature on ODB
Purpose: to activate the Oil Temperature Display in your Grand ODB. It sometimes happens that certain cars don't have this sensor available...
Eos (1F) Facelift – Opening/closing windows with remote control
Purpose: to activate closing and opening of the windows and sunroof with the remote control WITHOUT remaining pressed until the windows are...
Eos (1F) Facelift – OPS speed camera display on car radio screen
Purpose: Enables the display of OPS speed cameras on the car radio screen. Please note: The vehicle must be equipped with a...
Eos (1F) Facelift – Permanent headlamp deactivation (Scandinavian)
Purpose: to deactivate permanently switched-on low-beam headlamps, which are only activated when set to Auto, and to have only parking lights on...
Eos (1F) Facelift – Selective door unlocking
Purpose: Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all doors,...
Eos (1F) Facelift – Sound reduction on OPS activation
Purpose: Automatically lowers speaker volume when OPS is activated. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Eos (1F) Facelift – Speed limit display RNS 510
Purpose : to display the speed limit on the RNS 510 navigation screen. Procedure: 1 - Engine off, ignition off, connect your...
Eos (1F) Facelift – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Only compatible with Gateway 7N0! Temperature deactivation method. Proceed : 1 - Engine off, ignition...
Eos (1F) Facelift – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
Eos (1F) Facelift – Window closure after door opening
Purpose: Closes windows and sunroof after removing key and opening door. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
