Purpose : Used to set up selective door unlocking.
When unlocking the vehicle, only the driver’s door is unlocked. To unlock all doors, press the remote control’s unlock button twice.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“09 – Centrale Elec.
4 – Click on“Coding – 07” then“Long Coding Helper”.
Byte 0:
Bit 3 : Check “Selective Central Locking active (Single Door Locking)”.