Purpose: to change the number of flashes after activating the comfort indicators.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select” then click on “09 – Cent. Elect.” .
4 – Click on “ Adaptation – 10 ”.
5 – Select Channel 43 (Lights: Comfort Turn Signals (Cycles) from the drop-down list)
Choose a value between 1 and 5
