VW Beetle 3 Beetle (5C) (2011-2019)
Beetle (5C) – Activate Bluetooth on RNS 315
Purpose: to activate Bluetooth on the RNS 315. ATTENTION: Not all RNS-315 are equipped with a Bluetooth module. Module compatibility list3C0 035...
Beetle (5C) – Activate comfort turn signals
Purpose: to activate the comfort indicators. (By default, the number of flashes is 3. This value can be changed between 1 and...
Beetle (5C) – Activate Coming-Home / Leaving-Home
Purpose: To activate Coming-Home / Leaving-Home. (To work properly, the vehicle must be equipped with a light sensor. Headlight switch must be...
Beetle (5C) – Activate daytime running lights (DRL)
Purpose: to activate the daytime running lights (DRL). Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Beetle (5C) – Activate Driving School mode (RCD 210/RCD 310)
Purpose: Allows you to add a Driving School mode view to the RCD 210, RCD 310 that displays turn signals, speed ......
Beetle (5C) – Activate interior lighting when key is removed
Purpose: to activate the interior lighting when the key is removed from the neiman. Procedure: 1 - Engine off, ignition off, connect...
Beetle (5C) – Activate Off-Road mode on Discover PQ
Purpose: to add Offroad mode to Discover PQ with navigation. Warning! There are 3 lines of coding to do here. Proceed :...
Beetle (5C) – Activate rain sensor
Purpose: to activate the rain sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer,...
Beetle (5C) – Activate RNS 510 voice control
Purpose: to activate voice control on the RNS 510 (SDS). ATTENTION: RNS 510 firmware must be version v2660. Activating voice control brings...
Beetle (5C) – Activate wiper change mode
Purpose: activates changeover mode for front wipers. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Beetle (5C) – Adjust light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Beetle (5C) – Automatic closing of windows and roof in case of rain
Purpose: Automatically closes windows and sunroof when it rains. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Beetle (5C) – Automatic door locking after 30s
Purpose: to set automatic door unlocking when the vehicle has been unlocked but no doors have been opened for 30 seconds. Procedure:...
Beetle (5C) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Beetle (5C) – Automatic door unlocking
Purpose: to configure automatic door unlocking when the ignition key is removed. Procedure: 1 - Engine off, ignition off, connect your official...
Beetle (5C) – Automatic headlamp activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Beetle (5C) – Automatic headlight activation in case of rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure : 1 - Engine off,...
Beetle (5C) – Change number of flashes (comfort flashers)
Purpose: to change the number of flashes after activating the comfort indicators. Proceed : 1 - Engine off, ignition off, connect your...
Beetle (5C) – Change ODB language
Purpose: Select the language of your on-board computer. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Beetle (5C) – Change the RCD/RNS 510 theme
Purpose: to change the display theme of the RCD 510 and RNS 510. Procedure: 1 - Engine off, ignition off, connect your...
Beetle (5C) – Change the RCD/RNS OPS image
Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510. Procedure: 1 - Engine...
Beetle (5C) – Coming / Leaving Home with fog lamps
Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...
Beetle (5C) – Coming / Leaving Home with Xenons
Purpose: Allows xenon (or halogen) lights to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off,...
Beetle (5C) – Corner lights
Purpose: to activate cornering lights with fog lamps. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Beetle (5C) – Corner lights (with turn signal)
Purpose: to activate cornering lights with fog lamps when the turn signal is activated. Proceed : 1 - Engine off, ignition off,...
Beetle (5C) – Deactivate MirrorLink
Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover PQ MIB. The Mirrorlink service is no longer available since June...
Beetle (5C) – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
Beetle (5C) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Beetle (5C) – Delete ODB error (LED license plate light)
Purpose: Eliminates the error on the ODB when replacing original license plate light bulbs with non-error LEDs. Proceed : 1 - Engine...
Beetle (5C) – Dimming LEDs with turn signals
Purpose: to maintain LED intensity with indicators. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Beetle (5C) – Disable AM frequency on Discover
Purpose: Allows you to disable the AM radio frequency on the Discover PQ (the AM radio frequency is rarely used, unlike the...
Beetle (5C) – Disable Bluetooth connection beep
Purpose : Disables the beep when a device successfully connects to the car radio's Bluetooth. Procedure : 1 - Engine off, ignition...
Beetle (5C) – Disable horn without ignition
Purpose: to deactivate the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Beetle (5C) – Disable parking aid beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Proceed : 1 - Engine...
Beetle (5C) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Procedure: 1 - Engine off, ignition off, connect your official...
Beetle (5C) – Door lock/unlock confirmation (Turn signals)
Purpose: Used to set up confirmation of door locking using the indicators. Procedure: 1 - Engine off, ignition off, connect your official...
Beetle (5C) – Electronic differential lock (XDS)
Purpose: to activate the electronic differential lock (XDS). The electronic differential lock (XDS) is an extension of the well-known EDS function. However,...
Beetle (5C) – Enable Bluetooth audio (A2DP)
Purpose : Enables Bluetooth audio (A2DP). You can listen to music from your A2DP-compatible phone or mp3 player. Procedure : 1 -...
Beetle (5C) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Beetle (5C) – Fog lamps with high beam
Purpose: to deactivate the fog lamps when the high beam is switched on, so that they don't go out when the high...
Beetle (5C) – Hill Hold Control
Purpose: to activate Hill Hold Control. Hill Hold Control maintains brake pressure for a few seconds after prolonged application of the brake...
Beetle (5C) – Needle check
Purpose: activates needle sweep when the car is started. (Needle Sweep) ATTENTION: Only compatible with models since 2012 (Compatible module: 6R0 920...
Beetle (5C) – Park assist beep frequency setting
Purpose: to set the frequency of rear beeps during parking assistance. Proceed : 1 - Engine off, ignition off, connect your official...
Beetle (5C) – Retrofit heated mirrors
Purpose: to activate heated and heated mirrors. The vehicle must be equipped with heated rearview mirror glass. Or for retrofit installation of...
Beetle (5C) – Selective door unlocking
Purpose: Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all doors,...
Beetle (5C) – Speed limit display RNS 510
Purpose : to display the speed limit on the RNS 510 navigation screen. Procedure: 1 - Engine off, ignition off, connect your...
Beetle (5C) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
Beettle (5C) – Enable USB port for iPhone CarPlay (retrofit)
Purpose: Enables the USB port for iPhone CarPlay accounting (after activating App Connect and changing the USB and/or USB cable) for Discover...