Purpose: to customize the illumination intensity of the air-conditioning indicators.
Warning! There are 3 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“08 – Auto HVAC”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Dimming_characteristic_2-Y4”.
6 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose a value expressed in“%”
This is the intensity of all LED indicators (default value:“21%”).
Line 2:
3 – Click on“Select” then click on“08 – Auto HVAC”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Dimming_characteristic_3-Y4”.
6 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose a value expressed in“%”
This is the intensity of all LED indicators (default value:“12%”).
Line 3:
3 – Click on“Select” then click on“08 – Auto HVAC”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Dimming_characteristic_5-Y4”.
6 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose a value expressed in“%”
This is the intensity of all LED indicators (default value:“10%”).