Purpose: to activate the instrument cluster lighting when the parking/position lights are switched on.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
3 – Click on“Select”, then click on“17 – Instruments”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Illumination_algorithm-Scale_switching_algorithm”.
6 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select “lds” and confirm. (Source: Parking Light)
