Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit.
Warning: on some 2016 models with Discover Pro V2, code 20103 is not available and activation/deactivation can only be done at the VCP.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments”.
4 – Click on“Coding – 07” then click on“Long Coding Wizard”.
5 – Select byte“0”
Then check to enable or uncheck to disable the box in“6”:“Speed warning at 120 kph (75 mph) active”.
