Purpose : automatically moves the power seat back and straightens the backrest when the ignition is switched off and the door opened.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “36 – Driver’s Seat” . 2 – Switch on the ignition and run the VCDS program. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on“Adaptation – 10”.
5 – Select Channel 60 (Easy Entry) :
Set value to “1”
