Purpose: Automatically folds mirrors when vehicle is locked.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“52 – Passenger door”.
4 – Click on“Coding – 07”.
5 – Increase value by +4096
Line 2:
3 – Click on“Select”, then click on“42 – Driver’s door”.
4 – Click on“Coding – 07”.
5 – Increase value by +4096
ATTENTION: from 2011 models
Line 1 :
3 – Click on “Select”, then click on “42 – Driver’s door”.
4 – Click on “Coding – 07” then “Long Coding Helper”
5 – Select Byte 04:
Bit 6: This is a hidden bit, so modify the value directly in binary (replace 0 with 1).
Notes:
- The mirrors deploy automatically when the ignition is switched on.
- The mirrors will automatically fold down when the vehicle is locked with the remote control.
- To fold the mirrors automatically using KESSY, press and hold the button on the handle…