Purpose: to activate the closing and opening of the windows and sunroof with the KESSY keyless entry system. press and hold the handle until the windows are fully closed or open.
SFD: yes
Warning! There are 5 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.
2 – Switch on the ignition and run the VCDS program or the OBDeleven application.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Kessyfunktion – Komfortbedienung_fh_oeffnen_ueber_kessy”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ZV Komfort_Fensterheber – Komfortbedienung_fh_oeffnen_ueber_sz”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ZV Komfort_Fensterheber – Komfort_oeffnen”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.
Line 4:
3 – Click on“Select”, then click on“B7 – Access Startsystem Interface”.
4 – Click on“Security Access – 16” then enter the code“10587”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the top, there is a drop-down menu.
In this drop-down menu, choose“Passive_Komfort – Passive_Komfort_Oeffnen_aktiv”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.
Line 5:
3 – Click on“Select”, then click on“B7 – Access Startsystem Interface”.
4 – Click on“Security Access – 16” then enter the code“10587”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Passive_Komfort – Passive_Komfort_Togglen_aktiv”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.