Purpose: to change the Skoda start-up logo on the ODB (On-Board Computer) via VRS.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there’s a drop-down menu.
In this drop-down menu, choose“display representation or depiction” / “Displaydarstellung” / “représentation d’affichage”
7 – On this same page, there’s a second drop-down menu but towards the bottom
of the page.
On this, choose the variant of your choice then validate.
- Variant 1: Skoda logo
- Variant 2: Skoda 2 logo
- Variant 3: Skoda V/RS logo
