Purpose: to activate the high beam assistant for vehicles with the Sign Assist or Lane Assist option.
Vehicle must be equipped with camera Ref 5Q0: 5Q0-980-653-E
Caution if vehicle is equipped with DLA (Dynamic Light Assist) coding impossible (Light Assist already activated on auto lights)
Watch out! There are 4 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding – 07” then click on“Long Coding Helper”.
5 – Select byte“2”.
Then in this“Bit 0-2” drop-down menu, select“03 Lighting: Bi-Xenon Headlights with Light Assit (PR-8IG/8IP+8G1)”.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Assistance light functions-Menuesteuerung Femlichtassistent”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“present” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Assistance light functions-Menuesteuerung Femlichtassistent Werkseinstellung”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“present” and confirm.
Line 4:
3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist “.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Coding – 07” then click on“Long Coding Wizard”.
6 – Select byte“2”
Then, in the“Bit 0-7” drop-down menu, select“01 Coding_Light_Assist High_Beam_Assist”.
