Purpose: to activate/deactivate the daytime running lights (DRL) from the Amundsen/Columbus.
ATTENTION to your country’s regulations and technical inspection for daytime running lights!
However, if you’re coding in your car to avoid using too much of your battery, this is a good solution…
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.
2 – Switch on the ignition and run the VCDS program.
VCDS :
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Daytime running lights-Tagfahrlicht- Activierung durch BAP oder Bedienfolge moeglich”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
OBDeleven:
