Goal: Add fog lamps for Coming Home and Leaving Home in addition to LEDs and Xenon.
Warning! There are 5 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Comfort illumination-Coming Home Leuchten”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Low Beam” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 12NL LB45-Lichtfunktion E 12”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Coming Home oder Leaving home Aktiv” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 12NL LB45-Dimmwert EF 12”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“100” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 13NL RB5-Lichtfunktion E 13”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Coming Home oder Leaving home Aktiv” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 13NL RB5-Dimmwert EF 13”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“100” and confirm.
