Purpose: To display another logo when your Bolero / Amundsen / Columbus car radio is launched.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Coding – 07” then click on“Long Coding Helper”.
6 – Select byte“18”
Then modify the long coding value
List:
Logo Bit 0 Bit 1 Bit 2
Skoda (Default) disabled disabled disabled
RS enabled disabled disabled
L&K enabled enabled disabled
Monte Carlo enabled enabled enabled
Scout disabled enabled disabled
Greenline disabled disabled enabled
Or
00 – Skoda Default
01 – Skoda VRS
02 – Scout
03 – Lauren and Klement
04 – Greenline
