Purpose: activates both rear fog lights.
Watch out! There are 4 lines of coding to do here. (For Octavia 3 phase 1)
Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Lamp26NSL LA72 light function A 26”.
7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, select“Rear fog light if no trailer is attached” then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Lamp26NSL LA72 dimming value AB 26”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“100” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Lamp27NSL RC6 light function A 27”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“rear fog light if no trailer is plugged in” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“lamp27NSL RC6 dimming value AB 27”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“100” and confirm.
