Skoda Octavia 2 (1Z) (2004-2013) / Skoda Octavia 2 VRS / Octavia 2 Facelift (specific facelift coding at bottom of page)
Octavia 2 (1Z) – Corner Lights activation
Purpose: to activate cornering lights in conjunction with fog lights. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Octavia 2 (1Z) – Activate daytime running lights with fog lamps (DRL)
Purpose: Allows fog lamps to be used as daytime running lights. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Octavia 2 (1Z) – Activate Leaving Home without light sensor
Purpose: automatically switches on the headlights each time the vehicle is unlocked. The headlights will come on whether it's day or night....
Octavia 2 (1Z) – Activate turn signals in US mode
Purpose: to activate US indicators. (Octavia 2 phase 1 only) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Octavia 2 (1Z) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Octavia 2 (1Z) – Automatic headlight activation in the event of rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure: 1 - Engine off, ignition...
Octavia 2 (1Z) – Change ODB language
Purpose: Select the language of your on-board computer. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Octavia 2 (1Z) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) – Door unlocking confirmation (Key)
Purpose : to set door unlocking confirmation when using the key. Proceed : 1 - Engine off, ignition off, connect your official...
Octavia 2 (1Z) – Door unlock confirmation (Remote control)
Purpose : to set the door unlock confirmation when using the remote control. Proceed : 1 - Engine off, ignition off, connect...
Octavia 2 (1Z) – Door lock confirmation (key)
Purpose : to set door lock confirmation when using the key. Proceed : 1 - Engine off, ignition off, connect your official...
Octavia 2 (1Z) – Door lock confirmation (Remote control)
Purpose : to set door lock confirmation when using the remote control. Proceed : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) – Deactivate rear wiper when reversing
Purpose: to deactivate automatic activation of the rear windshield wiper during reversing when the front windshield wipers are operating. Procedure: 1 -...
Octavia 2 (1Z) – Deactivate windshield washer indicator
Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off, connect...
Octavia 2 (1Z) – Deactivate brake pad warning light
Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no...
Octavia 2 (1Z) – Automatic door unlocking
Purpose: to set automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) – Selective door unlocking
Purpose : Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all...
Octavia 2 (1Z) – Automatic closing of windows and roof in case of rain
Purpose: Automatically closes windows and sunroof when it rains. The vehicle must be locked with the remote control for this to work....
Octavia 2 (1Z) – One-touch window closure
Purpose: to activate closing and opening of the windows and sunroof with the remote control WITHOUT remaining pressed until the windows are...
Octavia 2 (1Z) – Ambient lighting intensity
Purpose: Used to adjust ambient lighting intensity. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Octavia 2 (1Z) – Folding mirrors with ignition off and door open
Purpose : Allows mirrors to be folded down even after the ignition has been switched off and a door opened. (Also enables...
Octavia 2 (1Z) – Headlight washer duration setting
Purpose: to set the duration of headlamp washer activation. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Octavia 2 (1Z) – Coming Home time setting
Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...
Octavia 2 (1Z) – Defrost time setting
Purpose: to set the operating time for mirror and rear window defrosting. Procedure: 1 - Engine off, ignition off, connect your official...
Octavia 2 (1Z) – Leaving Home time setting
Purpose: to set the length of time the headlights remain on after the car is unlocked. Procedure: 1 - Engine off, ignition...
Octavia 2 (1Z) – Adjusting light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Octavia 2 (1Z) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Octavia 2 (1Z) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Skoda Octavia 2 (1Z) Facelift (2008-2013)
Octavia 2 (1Z) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...
Octavia 2 (1Z) – Modify power steering hardness
Purpose : to adjust the hardness of the power steering for a softer or harder steering wheel. Proceed : 1 - Engine...
Octavia 2 (1Z) Facelift – Activate Bluetooth on RNS 315
Purpose: to activate Bluetooth on the RNS 315. ATTENTION: Not all RNS-315 are equipped with a Bluetooth module. Module compatibility list3C0 035...
Octavia 2 (1Z) Facelift – Activate Coming / Leaving Home
Purpose: Activates Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Octavia 2 (1Z) Facelift – Activate daytime running lights (DRL) only with headlight switch in Auto position
Purpose: to activate daytime running lights (DRL) only when the light switch is in Auto position. Procedure: 1 - Engine off, ignition...
Octavia 2 (1Z) Facelift – Activate rear view camera (retrofit)
Purpose: to activate the reversing camera after installation on the RCD 510/330/360/440 and RNS 315/510 (retrofit). Proceed : 1 - Engine off,...
Octavia 2 (1Z) Facelift – Activating RNS 510 voice control
Purpose: to activate voice control on the RNS 510 (SDS). ATTENTION: RNS 510 firmware must be version v2660. Activating voice control brings...
Octavia 2 (1Z) Facelift – Add daytime running lights (DRL) to ODB
Purpose: to add daytime running light (DRL) activation/deactivation to the ODB. (2011+) Procedure : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Adjusting brake assist
Purpose : to configure brake assist. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Octavia 2 (1Z) Facelift – Adjusting light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Octavia 2 (1Z) Facelift – Automatic door locks
Purpose : to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Octavia 2 (1Z) Facelift – Automatic door unlocking
Purpose: to set automatic door unlocking when the key is removed. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Octavia 2 (1Z) Facelift – Automatic headlight activation in case of rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure : 1 - Engine off,...
Octavia 2 (1Z) Facelift – Automatic headlights from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Octavia 2 (1Z) Facelift – Changing the image of the RCD/RNS OPS
Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510. Procedure: 1 - Engine...
Octavia 2 (1Z) Facelift – Changing the RCD/RNS 510 theme
Purpose: to change the display theme of the RCD 510 and RNS 510. Procedure: 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Coming / Leaving Home with fog lamps
Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Coming / Leaving Home with Xenons
Purpose: Activates xenon headlamps instead of fog lamps for Coming Home and Leaving Home. Procedure : 1 - Engine off, ignition off,...
Octavia 2 (1Z) Facelift – Corner lights activation
Purpose: to activate cornering lights in conjunction with fog lights. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Octavia 2 (1Z) Facelift – Corner Lights in reverse
Purpose: to activate the cornering lights with the fog lamps when reversing. Procedure : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Daytime running lights (DRL) off with handbrake on
Purpose: to deactivate the daytime running lights (DRL) when the handbrake is engaged. Procedure: 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Deactivate brake pad light
Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...
Octavia 2 (1Z) Facelift – Deactivate ESP
Purpose: to deactivate ESP completely. ATTENTION: Only valid for vehicles from 2012. Procedure : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
Octavia 2 (1Z) Facelift – Disable plate light control (ODB LED error)
Purpose: Disables license plate light control. Useful when installing LED bulbs without resistance or for error prevention. Procedure: 1 - Engine off,...
Octavia 2 (1Z) Facelift – Door lock/unlock confirmation (beep)
Purpose: Enables vehicle lock/unlock confirmation with beeps (with alarm) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Octavia 2 (1Z) Facelift – Electronic differential lock (XDS)
Purpose: to activate the electronic differential lock (XDS). The electronic differential lock (XDS) is an extension of the well-known EDS function. However,...
Octavia 2 (1Z) Facelift – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Fog lamps with high beam
Purpose: to deactivate the fog lamps when the high beam is switched on, so that they don't go out when the high...
Octavia 2 (1Z) Facelift – Hill Hold Control
Purpose: to activate Hill Hold Control. Hill Hold Control maintains brake pressure for a few seconds after prolonged application of the brake...
Octavia 2 (1Z) Facelift – Lowering the passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
Octavia 2 (1Z) Facelift – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Octavia 2 (1Z) Facelift – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Needle Sweep) Procedure: 1 - Engine off, ignition...
Octavia 2 (1Z) Facelift – OPS speed camera display on car radio screen
Purpose: Enables the display of OPS speed cameras on the car radio screen. Please note: The vehicle must be equipped with a...
Octavia 2 (1Z) Facelift – Permanent headlight deactivation (Scandinavian)
Purpose: to deactivate permanently switched-on low-beam headlamps, which are only activated when set to Auto, and to have only parking lights on...
Octavia 2 (1Z) Facelift – Remove alarm belt
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Octavia 2 (1Z) Facelift – Selective door unlocking
Purpose: Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all doors,...
Octavia 2 (1Z) Facelift – Speed limit display RNS 510
Purpose : to display the speed limit on the RNS 510 navigation screen. Procedure: 1 - Engine off, ignition off, connect your...
Octavia 2 (1Z) Facelift – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
