Purpose: to activate US indicators.
Watch out! Here, there are 6 lines of coding to be seen 10.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Lichtfunktion C 0”.
7 – On the same page is a second drop-down menu, but at the bottom
of the page.
On this, choose“Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)” then confirm. (Origin: inactive or Blinken links Dunkelphase)
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Lichtfunktion C 1”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose“Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)” then confirm. (Origin: inactive or Blinken rechts Dunkelphase)
Line 3: (Optional coding)
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Lichtfunktion D 0”.
7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, select“Daytime running lights” and confirm. (Origin : inactive)
Line 4: (Optional coding)
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Lichtfunktion D 1”.
7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, select“Daytime running lights” and confirm. (Origin : inactive)
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Dimmwert CD 0”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (light illumination between 0 and 100%) (Origin: 30)
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Dimmwert CD 1”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (light illumination between 0 and 100%) (Origin: 30)
!!! If you want the indicators to switch off completely when activated, add the following coding.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Lichtfunktion E 0”.
7 – On the same page is a second drop-down menu, but at the bottom
of the page.
On this, select“Blinken links Dunkelphase” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Lichtfunktion E 1”.
7 – On this same page is a second drop-down menu, but towards the bottom
of the page.
On this, choose“Blinken rechts Dunkelphase” then validate.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Dimming Direction EF 0”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“minimize” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Dimming Direction EF 1”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“minimize” and confirm.
