Seat Tarraco KN (2018+ )
Tarraco (KN) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
Tarraco (KN) – Activate auto-school mode
Purpose: Adds a driving-school mode view to the screen, displaying indicators, speed, etc. (also ideal for accompanied driving). Warning! There are 3...
Tarraco (KN) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
Tarraco (KN) – Activate fog lamps with daytime running lights (DRL)
Purpose: to activate daytime running lights (DRL) with fog lamps. Warning! There are 2 lines of coding to do here. Proceed :...
Tarraco (KN) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the door if it...
Tarraco (KN) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
Tarraco (KN) – Activate window operation with ignition off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
Tarraco (KN) – Activate/deactivate daytime running lights (DRL) via display
Purpose: to activate/deactivate daytime running lights (DRL) from the CAR menu. ATTENTION to your country's regulations and technical inspection for daytime running...
Tarraco (KN) – Activate/deactivate windshield wipers on key removal
Purpose: to activate windshield wiper stop when the key is removed (wipers stop directly in the position they were in) or to...
Tarraco (KN) – Activation of High Beam Assist (Light Assist)
Purpose: to activate the high beam assistant for vehicles with Sign Assist and/or Lane Assist options. Vehicle must be equipped with 3Q0...
Tarraco (KN) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
Tarraco (KN) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
Tarraco (KN) – Automatic keyless entry KESSY
Purpose: automatically locks the vehicle when you leave it with the key, provided the KESSY system (keyless entry/locking and starting system) is...
Tarraco (KN) – Changing the Virtual Cockpit display
Purpose: to modify and customize the Active Info Display / Virtual Cockpit. Depending on the setting, the display of the counter and/or...
Tarraco (KN) – Comfort flashing light
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Tarraco (KN) – Complete opening of sunroof with remote control
Purpose: Allows the sunroof to open fully when opening with the remote control. Proceed : 1 - Engine off, ignition off, connect...
Tarraco (KN) – Correction of Virtual Cockpit fuel consumption display
Purpose: to correct the fuel consumption display in the Virtual Cockpit. Note: these changes affect the display of instantaneous consumption, average consumption...
Tarraco (KN) – Cupra Sport meter
Purpose: to activate Cupra's central sport meter on the Virtual Cockpit screen. Proceed : 1 - Engine off, ignition off, connect your...
Tarraco (KN) – Daytime running light deactivation (DRL) with handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
Tarraco (KN) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Proceed : 1 - Engine off,...
Tarraco (KN) – Deactivate coupling between roller blind and sunroof
Purpose: cancels the coupling of roller blinds and panoramic sunroofs, allowing them to be adjusted separately. Procedure: 1 - Engine off, ignition...
Tarraco (KN) – Deactivate MirrorLink
Purpose: deactivates / removes MirrorLink from Full Link on the MIB. The Mirrorlink service is no longer available since June 1, 2020...
Tarraco (KN) – Deactivate open door alarm with contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
Tarraco (KN) – Deactivate roller blind when locking/unlocking
Purpose: To deactivate the roller blind comfort function when locking/unlocking. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Tarraco (KN) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (Lining change mode) Proceed...
Tarraco (KN) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
Tarraco (KN) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
Tarraco (KN) – Disable AM frequency
Purpose: to disable the AM radio frequency on the display (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...
Tarraco (KN) – Disable rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
Tarraco (KN) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
Tarraco (KN) – Easy Entry
Purpose: automatically retracts the electric driver's seat when the ignition is switched off and the door is opened (access aid). This option...
Tarraco (KN) – Fan speed display for air conditioning in Auto mode
Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...
Tarraco (KN) – Front Assist settings
Purpose: activates the distance control on the screen menu, to adjust Front Assist parameters. Information: This setting is only possible if the...
Tarraco (KN) – Headlamp flash with fog lamps
Purpose: Allows fog lamps to be used in addition to high beam. Warning! There are 2 lines of coding to do here,...
Tarraco (KN) – Heated seat memory
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Tarraco (KN) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (Hill-holding) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Tarraco (KN) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
Tarraco (KN) – Interior lighting deactivated when trunk is opened
Purpose: deactivates interior lighting when only the trunk is opened. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Tarraco (KN) – Key operation even with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
Tarraco (KN) – Lane Assist activation
Purpose: to activate Lane Assist for vehicles with Sign Assist and/or Light Assist options. Vehicle must be equipped with 3Q0 or 2Q0...
Tarraco (KN) – Lane Assist settings
Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...
Tarraco (KN) – Lap Timer
Purpose: to add the stopwatch to the Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Tarraco (KN) – License plate illumination, open trunk
Purpose: turns on license plate illumination when trunk / tailgate is open. Warning! There are 3 lines of coding to do here....
Tarraco (KN) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...
Tarraco (KN) – Lower passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” and the function must be activated...
Tarraco (KN) – Make-up quantity display on Virtual Cockpit
Purpose: to display the amount of fuel used since refuelling on the Virtual Cockpit. Proceed : 1 - Engine off, ignition off,...
Tarraco (KN) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Tarraco (KN) – Mirror folding adjustment by remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
Tarraco (KN) – Modify power steering hardness
Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic). Warning:...
Tarraco (KN) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :...
Tarraco (KN) – Oil temperature on Virtual Cockpit
Purpose: to display oil temperature on the Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Tarraco (KN) – Panel display on Virtual Cockpit
Purpose: displays speed limit signs in the Virtual Cockpit (Sign Assist). Vehicle must be equipped with 3Q0 camera Warning! There are 9...
Tarraco (KN) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
Tarraco (KN) – Speed of radar deactivation (or reversing camera)
Purpose: Selects the speed at which the radar or reversing camera is deactivated. Proceed : 1 - Engine off, ignition off, connect...
Tarraco (KN) – Speed threshold settings for cornering light activation
Purpose: to set the speed thresholds for turning on and off the cornering lights via the fog lights. (Corner Lights) Warning! There...
Tarraco (KN) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
Tarraco (KN) – Suppress electric tailgate beeps
Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Tarraco (KN) – Third brake light on when trunk is open
Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to...
Tarraco (KN) – Trailer Assist activation
Purpose: to activate Trailer Assist, which takes control of steering when the trailer is attached. Trailer direction is determined by the mirror...
Tarraco (KN) – Vehicle Hold Assist
Purpose: To set the memory of the Auto Hold button (A) - the Auto Hold function can be set to be always...
