
Seat Mii 1S (AA) (2011-2021)
Mii (1S) – Activate comfort indicators
Purpose: to activate the comfort indicators. (By default, the number of flashes is 3. This value can be changed between 1 and...
Mii (1S) – Activate Coming-Home / Leaving-Home
Purpose: To activate Coming-Home / Leaving-Home. (To work properly, the vehicle must be equipped with a light sensor. Headlight switch must be...
Mii (1S) – Activate daytime running lights (DRL)
Purpose: to activate the daytime running lights (DRL). Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Mii (1S) – Activate Driving School mode (RCD 215)
Purpose: Allows you to add a Driving School mode view to the RCD 215 that displays turn signals, speed, etc. (also ideal...
Mii (1S) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Mii (1S) – Automatic door unlocking
Purpose: to configure automatic door unlocking when the ignition key is removed. Procedure: 1 - Engine off, ignition off, connect your official...
Mii (1S) – Change number of flashes (comfort flashers)
Purpose: to change the number of flashes after activating the comfort indicators. Proceed : 1 - Engine off, ignition off, connect your...
Mii (1S) – Corner lights
Purpose: to activate cornering lights with fog lamps. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Mii (1S) – Corner lights (with turn signal)
Purpose: to activate cornering lights with fog lamps when the turn signal is activated. Proceed : 1 - Engine off, ignition off,...
Mii (1S) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Mii (1S) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. (On Mii phase 1 only turn signals possible) Procedure :...
Mii (1S) – Rear daytime running lights (DRL)
Purpose: to activate the rear lights as daytime running lights (Scandinavian DRL). Procedure: 1 - Engine off, ignition off, connect your official...
Mii (1S) – Selective door unlocking
Purpose: Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all doors,...
Mii (1S) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...