Purpose: activates US rear turn signals (red LED position light flashes instead of orange).
Watch out! There are 28 lines of coding to do here. Save your original coding. (Leon Phase 1 only)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Lichtfunktion E 23”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose “Blinken links Hellphase”.Blinken links Hellphase“then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimmwert EF 23”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimming Direction EF 23”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “maximize” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Lichtfunktion G 23”.
7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken links Dunkelphase” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimmwert GH 23”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“0” and confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimming Direction GH 23”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “minimize” then validate.
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Lichtfunktion E 24”.
7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Hellphase”.Blinken rechts Hellphase“then confirm.
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimmwert EF 24”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.
Line 9:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimming Direction EF 24”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“maximize” and confirm.
Line 10:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Lichtfunktion G 24”.
7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Dunkelphase” and confirm.
Line 11:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimmwert GH 24”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Set the value to“0” and confirm.
Line 12:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimming Direction GH 24”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“minimize” and confirm.
Line 13 :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Lichtfunktion E 26”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose “Blinken links Hellphase”.Blinken links Hellphase“then confirm.
Line 14:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimmwert EF 26”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.
Line 15 :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimming Direction EF 26”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “maximize” and confirm.
Line 16:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Lichtfunktion G 26”.
7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken links Dunkelphase” and confirm.
Line 17:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimmwert GH 26”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“0” and confirm.
Line 18:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimming Direction GH 26”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “minimize” then validate.
Line 19:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Lichtfunktion E 27”.
7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Hellphase”.Blinken rechts Hellphase“then confirm.
Line 20:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimmwert EF 27”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.
Line 21:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimming Direction EF 27”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “maximize” and confirm.
Line 22:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Lichtfunktion G 27”.
7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Dunkelphase” and confirm.
Line 23:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimmwert GH 27”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“0” and confirm.
Line 24:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimming Direction GH 27”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select “minimize” and confirm.
Line 25:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte18BLK HLA60-Dimming Direction A 18”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.
Line 26:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte18BLK HLA60-Dimming Direction C 18”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.
Line 27:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte19BLK HRC31-Dimming Direction A 19”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.
Line 28:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte19BLK HRC31-Dimming Direction C 19”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.
