Purpose: Enables “Carbon” display on the ODB screen.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments”.
4 – Click on“Security Access – 16” then click on“20103”.
5 – Click on“Adaptation – 10” .
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Display depiction” or “Affichage”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Version 2” and confirm.
