Purpose: to display the Cupra flag on the Active Info Display / Virtual Cockpit (AID V1 / SW 1701 / before 2020).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17- Instruments”.
4 – Click on“Coding – 07” then click on“Long Coding Helper”.
5 – Select byte“2”
Then select Bit“3-6”: Vehicule variant
Variant 5 (for Cupra) :
