Purpose: deactivates or reverses the rear wiper when reverse gear is engaged.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Rear Window Wiper-Traenenwischen Heck”.
7 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select“active” to activate or“not active” to deactivate, then confirm.
