Purpose: to display another logo when your Easy Connect car radio is launched.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Coding – 07” then click on“Long Coding Helper”.
6 – Select byte“18”
Then modify the hexadecimal value of the box in“3)” of the long code
List:
For TouchColor radios:
1 – Ecomotive (in red with old Seat logo)
2 – Cupline (in red with old Seat logo)
3 – FR (in red)
5 – Ecomotive
6 – CupLine
7 – FR
For Media Plus:
01 = FR (activate bit 0)
02 = Cupra (only 1 bit activate)
03 = Ecomotive (bits 0 and 1 activate)
Or if you have a bit 0-7 drop-down list, select your logo.
