Purpose: Adjusts the interior lighting or ambient lighting in the door trim strips of the Seat Leon 5F phase 1, so that the lighting remains red even when DriveSelect Eco and Normal modes are activated. By default, lighting in Eco and Normal modes is white, and only red in Sport mode. Once set, the red LED light bar is controlled/activated in all modes.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte17TFL R BLK SRB3TFL R BLK SR KC3-Lichtfunktion A17”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Inactive” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte16BLK SLB35BLK SL KC9-Lichtfunktion B16”.
7 – On the same page, there is a second drop-down menu at the bottom
of the page.
Adapt value to ambient light 3 and confirm. (Ambientelicht 3)
