Purpose: Allows you to modify and customize the Active Info Display / Virtual Cockpit in order to modify the speedo and Vmax.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.
2 – Switch on the ignition and run the VCDS program. or OBDeleven.
Line 1:
3 – Click on “Select”, then click on “17- Instruments”.
4 – Click on “Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, select the “Tachymetre” /“Tachometer end value” / “Speedometer_final_value” channel.
6 – In the “Value:” option, choose one of the 6 variants
Variant 0 = 260 km/h (standard)
Variant 1 = 280 km/h
Variant 2 = 240 km/h
Variant 3 = 300 km/h
Variant 4 = 320 km/h
Variant 5 = 260 km/h with intermediate values
Variant 6 = 280 km/h with intermediate values
