Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.
2 – Switch on the ignition and run the VCDS program. or OBDeleven.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Fahrlichthinweis – Fahrlicht_Hinweis_mehrfach”.
7 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select “no active” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Fahrlichthinweis – Fahrlichtwarnung_Hinweis_Konfig”.
7 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select“kein_Hinweis” and confirm.
