Seat Leon 4 (KL) (2020+ )
(Some ECUs may be inaccessible by SFD protection with VCDS, use OBDEleven to unlock SFD protection, and open the engine cover before coding)
Leon 4 (KL) – Activate AirCare memory function
Purpose: to activate the AirCare function's air-conditioning memory. In the factory setting, this is deactivated when you leave the vehicle. Once set,...
Leon 4 (KL) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
Leon 4 (KL) – Activate driving-school mode
Purpose: Adds a driving-school mode view to the MIB3, displaying turn signals, speed, etc. (also ideal for accompanied driving). SFD: yes Procedure:...
Leon 4 (KL) – Activate ESC Sport on the display
Purpose: Adds ESC Sport (ESP) to the MIB3 screen menu. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Leon 4 (KL) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
Leon 4 (KL) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
Leon 4 (KL) – Add-on quantity display in Virtual Cockpit
Purpose: to display the amount of fuel used since refuelling on the Virtual Cockpit. Proceed : 1 - Engine off, ignition off,...
Leon 4 (KL) – Adjust temperature of heated seats
Purpose: to adjust seat heater temperature levels. Note that temperature values for individual steps must be set in ascending order. Please check...
Leon 4 (KL) – Adjusting the Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
Leon 4 (KL) – Ambient Light Activation (30 colors)
Purpose: Activate the Ambient Light option on your MIB3 to change the 30 colors. SFD: yes Procedure: 1 - Engine off, ignition...
Leon 4 (KL) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. SFD: yes Procedure: 1- Engine off, ignition off,...
Leon 4 (KL) – Changing the Virtual Cockpit display
Purpose: to modify and customize the Active Info Display / Virtual Cockpit. Depending on the setting, the counter display is different. Procedure:...
Leon 4 (KL) – Coming / Leaving Home daytime on Auto
Purpose: Enables Coming Home and Leaving Home to be used during the day when the headlight switch is set to Auto. Proceed...
Leon 4 (KL) – Coming / Leaving Home with fog lamps
Purpose: to use fog lamps for Coming Home and Leaving Home. SFD: yes Proceed : 1 - Engine off, ignition off, connect...
Leon 4 (KL) – Compass display on Virtual Cockpit
Purpose: to display a compass on the Active Info Display / Virtual Cockpit (AID). SFD: no Procedure: 1 - Engine off, ignition...
Leon 4 (KL) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Procedure: 1 - Engine off, ignition...
Leon 4 (KL) – Deactivate active ignition warning with engine running/door open.
Purpose: to deactivate the active ignition alert when the engine is running or a door is open. SFD: yes Proceed : 1...
Leon 4 (KL) – Deactivate DSG reverse beep
Purpose: deactivates the beep when reverse gear is engaged in DSG position R. SFD: no Proceed : 1 - Engine off, ignition...
Leon 4 (KL) – Deactivate horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. SFD: yes Proceed : 1 - Engine off, ignition off, connect...
Leon 4 (KL) – Deactivate open door alarm with contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. SFD: yes...
Leon 4 (KL) – Deactivate rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. SFD: yes Proceed : 1 - Engine off, ignition off,...
Leon 4 (KL) – Deactivate right-hand overtaking prevention
Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left...
Leon 4 (KL) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (Lining change mode) SFD:...
Leon 4 (KL) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. SFD: yes Proceed :...
Leon 4 (KL) – Disable AM frequency
Purpose: to disable the AM radio frequency on the MIB3 (the AM radio frequency is rarely used, unlike the FM radio frequency)....
Leon 4 (KL) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Warning! There are 9 lines of coding to do here....
Leon 4 (KL) – Engine power display in Virtual Cockpit
Purpose: to display engine power on the Active Info Display / Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect your...
Leon 4 (KL) – Engine torque display in Virtual Cockpit
Purpose: to display engine torque on the Active Info Display / Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect your...
Leon 4 (KL) – Full sunroof opening with remote control
Purpose: Allows the sunroof to open fully when opening with the remote control. SFD : non Procedure: 1 - Engine off, ignition...
Leon 4 (KL) – G-Meter display on Virtual Cockpit
Purpose: to display the G-Meter accelerometer on the Active Info Display/Virtual Cockpit. SFD: yes Procedure: 1 - Engine off, ignition off, connect...
Leon 4 (KL) – Gearbox temperature display in Virtual Cockpit
Purpose: displays gearbox temperature on Active Info Display / Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Leon 4 (KL) – Headlamp flash with fog lamps
Purpose:Allows fog lights to be used in addition to high beam. Warning! There are 2 lines of coding to do here. Proceed...
Leon 4 (KL) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
Leon 4 (KL) – Key operation even with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
Leon 4 (KL) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. SFD: yes Proceed...
Leon 4 (KL) – Maintain sunroof tilt angle while driving
Purpose: to maintain the sunroof's angle of inclination while driving. SFD : non Procedure: 1 - Engine off, ignition off, connect your...
Leon 4 (KL) – Memory for heated seats
Purpose: Allows you to set the seat heating memory, 10 minutes or always on after the last use. When you switch the...
Leon 4 (KL) – Meter display on Virtual Cockpit
Purpose: Allows you to modify and customize the Active Info Display / Virtual Cockpit in order to modify the speedo and Vmax....
Leon 4 (KL) – Off-Road display on Virtual Cockpit
Purpose: displays the Off Road screen on the Active Info Display / Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect...
Leon 4 (KL) – Opening/closing windows with KESSY
Purpose: to activate the closing and opening of the windows and sunroof with the KESSY keyless entry system. press and hold the...
Leon 4 (KL) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
Leon 4 (KL) – Set ACC control in 1 km/h increments
Purpose: to adjust the ACC distance setting from the factory setting so that it can be set in 1 km/h increments by...
Leon 4 (KL) – Set light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. SFD: yes Procedure: 1- Engine off, ignition off, connect your official VAG-COM VCDS cable...
Leon 4 (KL) – Speed of radar deactivation (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Leon 4 (KL) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! Here, 1 line of coding is required, depending on the method selected. Proceed...
Leon 4 (KL) – Stopwatch display on Virtual Cockpit
Purpose: to display the stopwatch / lap timer and lap counter on the Active Info Display / Virtual Cockpit (AID). SFD: yes...
Leon 4 (KL) – Turbo pressure display in Virtual Cockpit
Purpose: to display turbo pressure on the Active Info Display / Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect your...
