IBIZA (6P)

VAG Coding VCDS ODBeleven Seat Ibiza 6P

Seat Ibiza 4 (6P) (2015-2017) / FR / Cupra

Ibiza (6P) – Activate daytime running lights (DRL) only in Auto position

Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...

Read more ...

Ibiza (6P) – Activate fog lamps as daytime running lights (DRL)

Purpose: to activate daytime running lights (DRL) with fog lamps. Warning! There are 2 lines of coding to do here. Proceed :...

Read more ...

Ibiza (6P) – Activation of progressive interior lighting

Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...

Read more ...

Ibiza (6P) – Adjusting the Soundaktor volume

Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...

Read more ...

Ibiza (6P) – Automatically folding mirrors

Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...

Read more ...

Ibiza (6P) – Boost quantity display on ODB

Purpose: to display the amount of fuel used since refuelling on the ODB (on-board computer). Proceed : 1 - Engine off, ignition...

Read more ...

Ibiza (6P) – Check des aiguilles

Purpose: to activate the scanning of the speedometer needles when the car is started. (Needle Sweep) Proceed : 1 - Engine off,...

Read more ...

Ibiza (6P) – Comfort flasher

Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...

Read more ...

Ibiza (6P) – Coming / Leaving Home with fog lamps

Purpose: To use the fog lamps for Coming Home and Leaving Home. Proceed : 1 - Engine off, ignition off, connect your...

Read more ...

Ibiza (6P) – Coming / Leaving Home with fog lamps, Xenon and LEDs

Goal: Add fog lamps for Coming Home and Leaving Home in addition to LEDs and Xenon. Warning! There are 5 lines of...

Read more ...

Ibiza (6P) – Coming Home automatic

Purpose: Automatically activates the Coming Home function (no need to make a headlight call). Proceed : 1 - Engine off, ignition off,...

Read more ...

Ibiza (6P) – Coming Home on opening the driver’s door

Purpose: Starts Coming Home when the driver's door is opened, not when the ignition key is removed. Proceed : 1 - Engine...

Read more ...

Ibiza (6P) – Corner lights activation

Purpose: to activate Corner Lights with fog lamps. Warning! There are 6 lines of coding to do here. Proceed : 1 -...

Read more ...

Ibiza (6P) – Corner Lights with turn signals

Purpose: to activate the Corner Lights on the side where the flasher is activated. Proceed : 1 - Engine off, ignition off,...

Read more ...

Ibiza (6P) – Daytime running light deactivation (DRL) with handbrake

Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...

Read more ...

Ibiza (6P) – Daytime running lights (DRL) on/off with Easy Connect

Purpose: to activate/deactivate daytime running lights (DRL) from Easy Connect. ATTENTION to your country's regulations and technical inspection for daytime running lights!...

Read more ...

Ibiza (6P) – Deactivate open door alarm with ignition

Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...

Read more ...

Ibiza (6P) – Deactivation of parking assist beeper

Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...

Read more ...

Ibiza (6P) – Door lock/unlock confirmation (beep/horn)

Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....

Read more ...

Ibiza (6P) – Enable USB port for iPhone CarPlay (retrofit)

Purpose: Enables the USB port for iPhone CarPlay accounting (after activating Full Link and changing the USB and/or USB cable) for MIB2s....

Read more ...

Ibiza (6P) – Fan speed display on air conditioning in Auto mode

Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...

Read more ...

Ibiza (6P) – Full sunroof opening with remote control

Purpose: Allows the sunroof to open fully when opening with the remote control. Proceed : 1 - Engine off, ignition off, connect...

Read more ...

Ibiza (6P) – Headlamp washer settings (Xenon)

Purpose: to manage the number of manual activations before the headlamp washer is activated on Xenon / to set the delay time...

Read more ...

Ibiza (6P) – Headlights with fog lamps

Purpose: Allows fog lamps to be used in addition to high beam. Warning! There are 2 lines of coding to do here,...

Read more ...

Ibiza (6P) – Hill Start Assist

Purpose: to set Hill Start Assist operation. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Read more ...

Ibiza (6P) – Lap Timer

Purpose: to add the stopwatch to the ODB (on-board computer). Only for vehicles with Color ODB. Proceed : 1 - Engine off,...

Read more ...

Ibiza (6P) – Mirror folding adjustment with remote control

Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...

Read more ...

Ibiza (6P) – Oil temperature on ODB

Purpose: to display oil temperature on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...

Read more ...

Ibiza (6P) – Radar deactivation speed (or reversing camera)

Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...

Read more ...

Ibiza (6P) – Rear lights activated with daytime running lights (DRL)

Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) Watch out! Here, there is 1 line of coding to do...

Read more ...

Ibiza (6P) – Remove belt alarm

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1 -...

Read more ...

Ibiza (6P) – US flasher

Purpose: to activate US nightlights with turn signals. Warning! There are 10 lines of coding to do here. Proceed : 1 -...

Read more ...


Translate »
error: Content is protected !!
Enable Notifications OK No thanks