Purpose : Disables the beep when a device successfully connects to the car radio’s Bluetooth.
Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on“Select”, then click on“77 – Telephone”.
4 – Click on“Adaptation 10”.
5 – Select “Bluetooth acknowledgement signal” from the value list
6 – Select “Off” from the second drop-down list
