Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P.
SFD: yes
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.
2 – Switch on the ignition and run the VCDS program or the OBDeleven application.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Clamp_Control” or “Clamp_Control – Ignition_Active_Message”.
7 – On this same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“No display” / “Aucun Affichage” and confirm.