Purpose: Activates memory 1 for km covered, average speed, time since start… These memories will be reset after an engine shutdown lasting more than 2 hours.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Adaptation – 10”.
5 – Choose Channel 19
In the second digit of the code (x?xxx), enter the value according to the desired option:
0 = Memory 2 only (permanent memory)
1 = Memory 1 + Memory 2
