Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn.
SFD: yes
Watch out! There are 5 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.
2 – Switch on the ignition and run the VCDS program or the OBDeleven application.
Line 1:
3 – Click on“Select”, then click on“19 – Gateway“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ZV Quittierungen – Quittierton_global“.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Line 2:
3 – Click on“Select” then click on “.19 – Gateway“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ZV Quittierungen – Akustische Quittieringsdauer Einfachhorn”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose“normal” or“kurz” (for a short signal), then confirm.
Line 3:
3 – Click on“Select” then click on “.19 – Gateway“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ZV Quittierungen – Quittungston_hmi_einstellbar“.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Line 4:
3 – Click on“Select” then click on “.19 – Gateway“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ZV Quittierungen – Quittierungston_bei_entriegeln“.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Line 5:
3 – Click on“Select” then click on “.19 – Gateway“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ZV Quittierungen – Quittungs_ton_bei_verriegen“.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
