Born (K11) – Daytime running light deactivation (DRL) with handbrake on

VAG Coding VCDS ODBeleven Cupra Born K11

Purpose: to deactivate the daytime running lights (DRL) using the handbrake.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.19- Gateway“.

4 – Unlock SFD protection.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Daytime running lights-Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

error: Content is protected !!
Enable Notifications OK No thanks