Purpose: to increase the intensity of door lighting.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte16BLK SLB35BLK SL KC9-Dimmwert AB 16”.
7 – On this same page is a second drop-down menu, but towards the bottom
of the page.
On this, choose“127” then validate. (Default is “100”).
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte17TFL R BLK SRB3TFL R SR KC3-Dimmwert AB 17”.
7 – On this same page is a second drop-down menu, but towards the bottom
of the page.
On this, choose“127” then validate. (Default is “100”).
