Purpose: to change the startup logo displayed on the Virtual Cockpit.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17- Instruments”.
4 – Click on “Coding – 07”.
5 – Click on “Long Coding Helper” .
6 – Select Byte 9:
Bit 0-2 : Select the value according to the chosen display:
activate bit 0 red zone + TTs logo
activate bit 1 red zone + TT logo (2014/2015)
activate bit 1 red zone + TTRS logo (2016)
activate bit 1 + 2 red zone + TT logo (2016)
