Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding! Perfect for mounting a fixed tuning spoiler.
Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2– Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Zusatzfunktionen – Tt_Spoiler” or “Allwetterlicht – Tt_Spoiler”.
7 – On the same page, you’ll find a second drop-down menu (Origin: elektrisher spoiler)
On this menu, select“feststehender spoiler” to keep it fixed.
Or, to completely disable aileron operation for a fixed aileron installation, select “Not installed”.
OR
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on “Coding – 07” then click on “Long Coding Helper”.
5 – Choose Byte 02:
Bit 5-6: Select : “feststehender spoiler”