Purpose: activates needle sweep when the car is started. (Needle Sweep)
ATTENTION: Only for TTS and TT Facelift compatible according to meter.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17 – Instruments”.
4 – Click on ” 10 – Adaptation
5 – Select Channel 36 “Special Functions”
Add +1 to the existing value as indicated in the bubble (xx?).
Example: origin value 00 or 0: change to 01 or 1 / origin value 10: change to 11 / origin value 000 : change to 001
