Purpose: Allows you to fine-tune seat ventilation, you can increase or decrease all respective seat ventilation levels by up to 10% compared to factory delivery to obtain the optimum amount of ventilation for you.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 (Front seats):
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Fine adjustment of seat ventilation level 1” or “Sitzlüftung Feineinstellung Stufe 1”.
Then levels 2 and 3 (Power of ventilated seats)
6 – On this same page, there is a second drop-down menu, but towards the bottom of the page.
On this, choose the range of values: -10 to +10 (% – per cent) in relation to the basic ventilation speed, then validate.
Line 2 (Rear seats):
3 – Click on“Select” then click on“09 – Cent. Elect.”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Fine adjustment of rear seat ventilation level 1” or “Sitzlüftung hinten Feineinstellung Stufe 1”.
Then levels 2 and 3 (Power of ventilated seats)
6 – On this same page there is a second drop-down menu, but towards the bottom of the page.
On this, choose the range of values: -10 to +10 (% – per cent) in relation to the base ventilation speed, then validate.
