Purpose: automatically lowers the passenger mirror when reversing.
The mirror adjustment knob must be in position“R” for the passenger mirror to lower automatically.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“52 – Passenger door”.
4 – Click on“Coding – 07” then click on“Long Coding Helper”.
5 – Select byte“4”
Then check Bit“2”:“Reserve Gear Mirror Dipping active”
and Bit“3”:“Position Memory for Reserve Gear Mirror Dipping active”.
Line 2:
3 – Click on “Select”, then click on “52 – Passenger door”.
4 – Click on “Adaptation – 10” .
5 – Select“mirror lowering with rear gear” channel
Select “Active”.
Line 3:
3 – Click on ” Select”, then click on “Select”.09 – Cent. Elect.” .
4 – Click on “Security Access – 16” then enter the code “31347”.
5 – Click on “Adaptation – 10”.
6 – Choose Channel Zugangskontrolle 2-Spiegelabsenkung bei Rueckwaertsfahrt
Select “Active”.