Purpose: to activate the welcome sound emitted when the MMI/vehicle is switched on.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle configuration – vehicle_readiness_sound”.
6 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.