Purpose: to reprogram / recode the new battery of all its data after replacement.
Watch out! Depending on your calculator, select 61 or 19 (CAN or UDS)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
61-Batterie Regul. CAN
This procedure concerns the replacement of the battery in vehicles using a separate battery management control module.
Address 61: Regul Battery. Labels: 4F0-910-181.lbl Reference SW: 4F0 910 181 E HW: 4F0 915 181 A Component: ENERGIEMANAGER H12 0490 Subsystem 1 – Part No: 000 915 105 C Component: von VA0 2502160103 Coding: 303030393135313035432056413032353032313630313033 Shop N °: WSC 54332 321 22222
3 – Click on“Select” then click on“61 – Battery Regul. ”.
4 – Click on“Coding – 07”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose the battery (slave) classified n°1
6 – In“Coding battery” :
- Enter the new Battery Part number (10 or 11 digits).
- Enter the new battery serial number (10 digits).
- Select the new battery supplier.
[OK]
[! Do – it]
[Close Controller, Go Back – 06]
Your new battery should now be coded, and the battery control module should be aware of the new battery.
19-CAN Gateway using CAN
This procedure concerns battery replacement in vehicles using a battery management control module which is a slave / subsystem of the CAN gateway.Address 19: CAN Gateway (J533) Labels: 8T0-907-468.clb Reference SW: 8T0 907 468 Q HW: 8T0 907 468 L Component: GW-EBM 5CAN-M H10 0095 Subsystem 1 – Part No SW: 8K0 915 181 B HW: 8K0 915 181 B Component: J367-BDM H04 0150
Installation of a new battery requires use of the [Long Adaptation-0A function] under the 19-CAN-Gateway control module. . Follow the on-screen instructions to enter the part number, supplier, serial number and any long new value.
3 – Click on“Select” then click on“19 – Gateway CAN”.
4 – Click on“Long Adaptation-0A”.
5 – Select Channel 04
VCED will populate instructions in the form of a pop-up balloon with formatting. For example:Format: nnnnnnnnnnn XXX zzzzzzzzzz N = battery part number (11 digits) X = battery supplier (3 digits) Z = battery serial number (10 digits)
[Add to log] Saving the original value in a log is strongly recommended.
Enter the New Battery details in the new field value.
- Note, the new value must be 26 (alpha numeric) characters in total, including spaces! If in doubt, check the logbook for the original battery formatting details.
[Test]
[Save]
The value has been accepted by the controller the new battery coding is complete
[Done, Back]
[Close Controller, Go Back – 06]
19-CAN Gateway help (UDS / ODX)
This procedure concerns battery replacement in vehicles using a battery management control module which is a slave / subsystem of the CAN gateway.Address 19: CAN Gateway (J533) Labels: None Reference SW: 4G0 907 468 E HW: 4G0 907 468 A Component: J533 – Gateway H08 0213 ASAM Dataset: EV_GatewUDS 001025 Battery Monitoring Control Module: Subsystem 1 – Part No SW: 8×0 915 181 HW: 8×0 915 181 Component: J367-BDM H07 0140
Installing a new battery requires the use of the [Adaptation-10 function] under the 19-CAN-Gateway control module. Use the drop-down menus to enter the part number, vendor, and serial number information located on the new battery.
Line 1:
3 – Click on“Select”, then click on“19 – CAN Gateway”.
4 – Click on “Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Adaptation batterie-Capacité nominal de la batterie”.
6 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose a nominal value indicated on your battery, e.g.“70Ah”.
Line 2:
3 – Click on“Select”, then click on“19 – CAN Gateway”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Adaptation batterie-Fabriquant de batterie”.
6 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the corresponding brand:
Ex: In the case of the VARTA E39, choose“VAO”.
Line 3:
3 – Click on“Select”, then click on“19 – CAN Gateway”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Adaptation batterie-Numéro de série de la batterie”.
6 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, enter the corresponding serial number:
Warning, insert only the last 10 digits of the serial number.
The value has been accepted by the controller the new battery coding is complete
[Done, Back]
[Close Controller, Go Back – 06]
Battery
The vehicle’s battery is housed in the engine compartment and protected by a battery tray. Battery size and design depend on engine version, equipment and national variant. Standard, EFB and AGM batteries are used.
Vehicles with petrol engines and start/stop systems are fitted with EFB batteries, while vehicles with diesel engines and start/stop systems are fitted with AGM batteries. Vehicles with stationary chauffage generally have an AGM battery.
EFB
An EFB (Enhanced Flooded Battery) is a reinforced wet battery. The positive plate inside the battery is coated with an additional polyester canvas. This gives the battery’s active mass additional support on the plate. The alternating cycle resistance of these batteries is superior to that of standard batteries. During charging, the EFB battery is treated like a standard battery.
AGM battery
In AGM batteries (short for Absorbent Glass Mat), the battery’s electrolyte is retained in a micro-porous glass mat. An AGM battery is not only even more resistant to alternating cycles than an EFB battery, but also watertight. When charging, follow the charger’s operating instructions and select the AGM battery program if necessary.
In the case of AGM batteries, the automotive battery electrolyte is retained in a micro-porous glass mat. In addition to
increased resistance to alternating cycles, an AGM battery is characterized by its good sealing properties. Waterproofing is of crucial importance
, especially when the battery is installed in
the passenger compartment. When charging, please follow the charger’s operating instructions and select the program for
AGM battery, if applicable.
Below we see the battery brand, serial number and manufacturer.
