Purpose : to change the illumination of the hands and dial when the lights are off.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17 – Instruments”.
4 – Click on “Coding – 07 ”, then click on“Long Coding Helper”.
5 – Select Byte 0:
Bit 0-1: Select from drop-down list according to desired illumination
00 Illumination: Hands OFF and Counter OFF
01 Illumination: Hands ON and Counter OFF
02 Illumination: Hands OFF and Counter ON
03 Illumination: Hands ON and Counter ON