Purpose: adjusts LED intensity when lights are on.
The original LED intensity is set to 9% of power with the lights on.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on ” Select”, then click on “Select”.09 – Cent. Elect.” .
4 – Click on “Security Access – 16” then enter the code “20113”.
5 – Click on “Adaptation – 10”.
6 – Select Channel 3:
Enter new value between 5 and 100
(a value below 5% generates an error code and a warning on the ODB)