Purpose: to adjust the volume of the engine sound (Active Sound System – Soundaktor) inside the car. To mute the sound, use value: 0.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on ” Select “, then click on “Select”. C0 – Aktuator ” .
4 – Click on “Adaptation – 10”.
6 – Select Channel :“Actuator volume for motor noise generation”.
Select your sound percentage (between 0 and 100)