Purpose: to activate the radar display on the MMI with the Audi Parking System rear option only.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “76 – Station Help” . 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on “Coding 07”.
5 – Replace the second “0” (from the left) with a “2”.
Ex: Replace “0001216” with “0201216”.
Coding :
0?xxxxx: Visual Display
0 = without Visual Display on MMI
2 = with Visual Display on MMI