Audi A8 D3 (4E) (2002-2010) / Audi S8
A8 (D3) – Activate automatic speed selection on ODB
Purpose : displays automatic speed selection in D and S modes on the on-board display. Procedure: 1 - Engine off, ignition off,...
A8 (D3) – Activate battery charge status in MMI
Purpose: Activates battery charge status in Audi MMI Basic / 2G / 3G / 3GP. Procedure: 1 - Engine off, ignition off,...
A8 (D3) – Activate DVD playback while driving (VIM)
Purpose: Allows you to remove the MMI protection and continue watching a DVD or video while driving (Video in Motion). Proceed :...
A8 (D3) – Activate MMI 3G CD/DVD extraction
Purpose: Activates CD/DVD extraction in the DVD player. Allows you to import / copy all CD/DVD / SD card content to the...
A8 (D3) – AUX-IN activation (retrofit)
Purpose: To activate the AUX (Auxiliary) socket on the rear of the MMI 2G 3G 3GPLUS, for retrofitting to CarPlay / Android...
A8 (D3) – Change MMI 3G start logo
Purpose: to change the Splash Screen of the MMI 3G. For a custom logo see tuto: A8 (D3) - MMI 3G/3GP custom...
A8 (D3) – Change ODB language
Purpose: to change the language of messages on the driver information system display. Proceed : 1 - Engine off, ignition off, connect...
A8 (D3) – Change start logo MMI 2G
Purpose: to change the Splash Screen of the MMI 2G. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
A8 (D3) – Controlled suspension calibration
Purpose: to recalibrate the pilot-controlled suspension reference height to the original values. Original suspension height Audi A8 (4E): standard suspension 416 mm...
A8 (D3) – Corner lights activation
Purpose: to switch on the fog lamp on the side where the steering wheel is turned. Procedure: 1 - Engine off, ignition...
A8 (D3) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...
A8 (D3) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (EPB reset / Lining...
A8 (D3) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
A8 (D3) – Lock/unlock confirmation (beeps)
Purpose: Used to set confirmation of door locking/unlocking with beep (alarm). the vehicle must be equipped with the original alarm. Procedure: 1...
A8 (D3) – Maintain LED intensity with turn signals
Purpose: to maintain LED intensity with indicators. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
A8 (D3) – Meter lighting
Purpose : to change the illumination of the hands and dial when the lights are off. Proceed : 1 - Engine off,...
A8 (D3) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
A8 (D3) – MMI 3G Bluetooth activation
Purpose: to activate Bluetooth with an Audi MMI 3G. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
A8 (D3) – MMI 3G/3GP customized start logo
Purpose: To modify and/or customize the home screen logo (Custom Splash Screen) with a personalized image of the MMI 3G and 3GPLUS....
A8 (D3) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Needle Sweep) Proceed : 1 - Engine off,...
A8 (D3) – Oil temperature via Lap Timer
Purpose: to add the oil temperature to the stopwatch on the ODB screen. (For latest-generation A8 D3) Proceed : 1 - Engine...
A8 (D3) – Opening/closing windows with remote control
Purpose: to activate closing and opening of windows and sunroof with remote control. Procedure: 1 - Engine off, ignition off, connect your...
A8 (D3) – Parking aid display on MMI
Purpose: to activate the radar display on the MMI with the Audi Parking System rear option only. Procedure: 1 - Engine off,...
A8 (D3) – Rear lights activated with daytime running lights (DRL)
Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Proceed : 1 - Engine off, ignition off, connect your...
A8 (D3) – Reprogram a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! Depending on your calculator, select 61...
A8 (D3) – Speed alert display and ODB MMI 2G
Purpose: Activates the display of the speed alert setting and on-board computer activation on the MMI 2G screen. Procedure: 1 - Engine...
A8 (D3) – Speed of radar deactivation (or reversing camera)
Purpose : Selects the speed at which radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
A8 (D3) – Suppress belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
A8 (D3) – Xenon presentation mode
Purpose : Activates xenon light kinematics when the vehicle is started. Proceed : 1 - Engine off, ignition off, connect your official...
